Festool Screwdriver and drill bit set TID 18 HPC 4,0 I-Set T18 577245
Super flexible for drilling and screwdriving or extremely powerful, robust and long-lasting. With the T 18 +3 cordless drill and the TID 18 cordless impact screwdriver, you are equipped for almost every drilling and screwdriving application. The T18+3 with completely electronic torque adjustment, CENTROTEC quick-change system, angle attachment, eccentric attachment and depth stop is super flexible and means that you can quickly change between drilling and screwdriving. Meanwhile, the TID 18 is a compact powerhouse that offers an impressive service life thanks to its extremely robust hammer mechanism. Moreover, the turning screw will take the full force of the TID 18 with its ¼" tool holder – with no strain at all on your wrist: This is thanks to the tangential hammer mechanism with no strength-sapping back torque. The two tools impress with their brushless and maintenance-free EC-TEC motors which, combined with the battery pack, ensure maximum endurance. The cordless drill and battery pack are completely covered with the Festool SERVICE, giving you peace of mind for your day-to-day work.
- Robust: Long-lasting quality components, also fully covered thanks to the comprehensive support provided by Festool Service
- Maximum power: Thanks to the extremely powerful, brushless, and therefore long-lasting, EC-TEC motor
- Ergonomic: compact design enables you to work accurately and for longer without becoming tired, even in hard to reach areas
- Mobile: Stowed in Systainer³ products, the screwdrivers can also be seamlessly integrated into bott vehicle equipment for easy transportation from the workshop to the construction site
- Flexible battery system: For applications with high power needs, the 4.0 Ah Li-HighPower Compact battery pack provides the ideal powerful, compact and lightweight solution. For even less weight, the 3.1 Ah Compact battery pack is an ideal option for light screw joints
- The cordless drill and battery pack are fully covered by the comprehensive support provided by Festool Service
- T18+3: Switch from screwdriving to drilling without changing the set torque Fully electronic torque setting and switch-off for precise screwdriving
- T18+3: Clever attachments and CENTROTEC rapid tool-change system for all applications: Angle attachment, eccentric attachment and depth stop
- T18+3: FastFix interface on the cordless drill for rapid change of attachments within seconds without tools
- TID 18: Safe: Kickback-free tangential hammer mechanism protects your wrist
- TID 18: Convenient: Tool-free 1/4" holder, integrated bit storage, optimum LED illumination of the work area, belt clip for attachment on both sides
Usage:
- Screwdriving work that protects your wrist, with no reverse torque
- Furniture assembly and kitchen fitting
- Installation of fittings, rear walls, strips
- Installation of doors and windows
- Screwdriving in wood, metal and plastic
- Fences, pergolas, carports, canopies
- Production of wooden substructures
- Drilling and screwdriving in wood, metal and plastic
Speed control for adjusting to all types of materials.
Fitted with high-performance lithium ion battery pack.
The brushless EC-TEC motor is wear-free and converts the energy from the battery into optimum power with virtually no losses. The electronic motor management also guarantees maximum service life: Microprocessors monitor and control the temperature, voltage and current consumption of the motor, electronics and battery.
Everything is to hand with integrated bit storage, powerful LED and belt clip for attachment on both sides.
It comes in a Systainer³ and so can be integrated perfectly into the bott vehicle fixture for easy transport from the body shop to the building site.
Compatible with Li-HighPower Compact, Compact and Standard batteries, as well as all chargers, for the perfect power-to-weight ratio for every application.
The light T-design, the slender SoftGrip handle and the perfectly located centre of gravity ensure that work goes particularly easily and smoothly.
As with all cordless drills from Festool, the bits can also be inserted in the direct bit holder of the spindle on the T 18+3.
Fast change between drilling, countersinking and screwdriving: The CENTROTEC quick-change system is a chuck and bit holder in one and, at the same time, 50% smaller and 80% lighter than a standard drill chuck. The hexagonal tools are centred using balls for optimised power transmission and ten times higher true running.
Fully electronic torque adjustment and shut-off for optimum power development in all situations. The torque setting for screwdriving is retained, even when drilling takes place at maximum torque.
For controlled work with self-driving screws.
No back torque for screwdriving that protects your wrist.
Quick and easy bit changes.