- Compact metal bevelling tool for 45° chamfers and radii of 2 to 3 mm at visible edges.
- Surfaces free from oxide and burrs as ideal preparation for the application of powder or paint coatings for maximum protection from corrosion.
- One-touch controller: Patented, tool-free setting of the cutting depth in 0.1 steps
- stop points for short setting times, and protection against unintentional adjustment of the cutting depth when working.
- Slim cutter head with standard carbide indexable inserts and ball-bearing stationary seal ring for working in tubes and in curves.
- Guide stop for a uniform finish and high quality of the surface when processing straight sheets.
- Metabo Marathon motor with patented dust protection for long service life.
- Constamatic (C)-Full wave electronics: fast work progress by means of almost constant speed under load.
- Electronic safety shutdown of the motor for safe working in case the tool stops unexpectedly.
- Electronic overload protection, soft start and restart protection.
- Slim design for ideal handling.
TECHNICAL
- No-load speed 11500 rpm.
- Rated input power 900 W.
- Output power 470 W.
- Type of edges Chamfer and radius.
- Max. chamfer width 45° 6 mm.
- Max. chamfer height at 45° 4 mm.
- Possible radii R2 / R3.
- Grading of cutting depth setting 0.1 mm.
- Curves smallest inner Ø 13 mm.
- Weight (without power cable) 2.5 kg.
- Cable length 4 m.
NOISE AND VIBRATION
- Sound pressure level 87 dB(A).
- Sound power level (LwA) 98 dB(A).
- Uncertainty of measurement K 3 dB(A).
