The groove depth can be determined via three different cutter spindles. Variant 1 without a ball bearing must be used with a parallel side fence, variant 2 with a 16 mm ball bearing and variant 3 with a 28 mm ball bearing.
- The carbide-tipped disc groove cutter is perfectly suited to creating grooves for seals or for parquet touch-up
- Cutter replacement is done quickly and easily via a screw on the cutter spindle
- Carbide-tipped cutters
- Various routing depths can be realised by different cutter spindles
TECHNICAL
- D40.00 mm
- Dia.6.00 mm
- NL5.00 mm
