Festool Scraper ZK HW 45/45 499749
As with large, stationary machines, the scraper is a very important work step for processing plastic edges. With its help, the edging overhang becomes perfectly flush and the radius is cleanly removed in order to get rid of impact marks from the routing process.
- Trimming overhanging material after the edge is cut (plastic edging) without damaging the surface of the workpiece. smoothing away impact marks left by cutters during the routing process (R1, R1.5 and R2 mm curves)
- Flat side for removing edging overhang and glue residues on the panel surface
- Cord is used in the application as a support and specifies the optimal angle
- Optimal degree of sharpness and angle of attack prevent damage to the workpiece surface
- Radii perfectly coordinated to Festool's range of routers
- Three different edge radii for the standard edge thicknesses (radii R 1, R 1.5 and R 2 mm)
Usage:
- Breaking edges, affixing curve and cleaning thin plastic edges and inclined edges/mitred edges (R1, R1.5 and R2 mm curves). Scraper rested on the attached cord for perfect guidance. Solid carbide for greater durability and resistance to wear
- Smoothing away impact marks left by cutters during the routing process
- Affixing radius and cleaning thin plastic edges and inclined edges/mitred edges
The three different edges on the scraper allow you not only to smooth down edging and remove impact marks, but also to round thin edging.
Resting the scraper on the attached cord ensures perfect guidance.